3. Cure the Base Coat using a 48w lamp or a higher wattage lamp for 60 seconds if using an LED lamp, or 2 minutes if using a UV lamp. This curing process is essential to ensure proper adhesion and drying of the Base Coat.

4. Once the Base Coat is cured, you can proceed by applying your preferred AISHA nail colour over it. Follow the instructions provided with the specific polish for the best application.

5. After applying the nail colour, it's time to seal and protect it with a top coat from AISHA. Apply a thin, even layer of the AISHA top coat over the coloured polish and let it dry.

6. If you wish to remove the nail polish, you need to file a bit first and then you can use acetone. Soak a cotton pad with acetone and place it on your nail, then wrap it with foil or use nail clips to secure it. Allow the acetone to dissolve the polish for a few minutes, then gently remove the foil or clips and wipe away the dissolved polish with a clean cotton pad.